Installing under cabinet lighting can be a great way to brighten up your kitchen and make it more functional. There are a few different types of under cabinet lighting to choose from, but LED lights are a popular option because they are energy-efficient and long-lasting.
If you’re considering installing LED lights under your kitchen cabinets, here are a few tips to help you get started:
1. Decide where you want to install the lights.
The best place to install under cabinet lighting is typically along the perimeter of the cabinets. This will provide even lighting throughout the kitchen.
2. Choose the right type of lights.
There are a few different types of under cabinet lighting to choose from, including puck lights, tape lights, and strip lights. LED lights are a popular option because they are energy-efficient and long-lasting.
3. Measure the space and buy the right number of lights.
Before you buy any lights, be sure to measure the space and calculate how many lights you’ll need. You’ll also need to purchase a power supply for each light.
4. Install the lights.
Once you have all of the supplies, it’s time to install the lights. This can be a DIY project, or you can hire a professional to do it for you.
5. Configure the lights.
Once the lights are installed, you’ll need to configure them to your liking. Most lights come with a remote control, so you can easily adjust the brightness and color.
6. Enjoy your new kitchen lighting!
Once the lights are installed and configured, enjoy your bright and functional new kitchen lighting!
Table of Contents
- 1 How do you put lights under kitchen cabinets?
- 2 How do you fit LED lights under kitchen units?
- 3 Where should LED strip lights be placed under cabinets?
- 4 How do you hardwire under cabinet LED strip lights?
- 5 How do you power under cabinet lighting?
- 6 How do I hide my LED strip power supply?
- 7 How do you hide the power cord for LED strip lights?
How do you put lights under kitchen cabinets?
When it comes to kitchen lighting, many homeowners think of the main overhead light and may not give much thought to other areas of the kitchen that could use some illumination. One such area is under the kitchen cabinets.
There are a few ways to add lighting under kitchen cabinets. One is to install strip lights, which are long, narrow lights that can be attached to the underside of the cabinets. Another option is to install puck lights, which are small, round lights that can be mounted in various places, including under the cabinets.
If you’re looking to add some extra light to your kitchen but are on a budget, you can also try using LED tape lights. LED tape lights are a great option because they are affordable and energy-efficient. Plus, they come in a variety of colors, so you can choose the perfect hue to match your kitchen’s décor.
To install LED tape lights under your kitchen cabinets, you’ll need to first measure the space you want to light up. Once you have the dimensions, you’ll need to purchase some LED tape light and a transformer. The transformer will convert the voltage from your home’s electrical system to a safe level for the LED tape light.
Once you have all of the supplies, it’s time to get started. First, you’ll need to remove the cabinet doors and measure the space between the top of the cabinet and the bottom of the countertop. You’ll also need to measure the width and height of the space.
Next, cut the LED tape light to the correct size and attach it to the transformer. Then, use the included adhesive to attach the LED tape light to the underside of the cabinet. Plug in the transformer and you’re ready to go!
How do you fit LED lights under kitchen units?
LED lights are a great choice for kitchens, as they are energy-efficient and long-lasting. If you want to install LED lights under your kitchen units, here are a few tips to help you get started:
1. Decide where you want to place the LED lights. They can be installed anywhere under the kitchen units, but it is best to place them in a spot where they will be visible and provide good lighting.
2. Measure the area where you want to install the LED lights and make a note of the dimensions.
3. Purchase some LED lights that are designed to be used under kitchen units. They will be slightly smaller than regular LED lights, so make sure to get the right size.
4. Remove the cover of the kitchen unit where you want to install the LED lights.
5. Drill a hole in the bottom of the kitchen unit that is the same size as the LED light.
6. Insert the LED light into the hole and replace the cover of the kitchen unit.
7. Plug in the LED light and test it to make sure it is working properly.
Where should LED strip lights be placed under cabinets?
LED strip lights are a great way to add light to a dark space. They are also a great way to add some extra decoration to a room. When it comes to where to place LED strip lights, there are a few things to consider.
One of the most popular places to put LED strip lights is under cabinets. This is a great place to put them because they can provide extra light to the space and they can also add some decoration. When placing LED strip lights under cabinets, it is important to make sure that they are not too close to the cabinets. If they are too close, they may cause the cabinets to heat up and this could be dangerous.
Another place to consider putting LED strip lights is in the attic. This is a great place to put them because they can provide extra light and they can also help keep the attic warm in the winter. When putting LED strip lights in the attic, it is important to make sure that they are not too close to the roof. If they are too close, they may cause the roof to heat up and this could be dangerous.
Finally, LED strip lights can also be put in the basement. This is a great place to put them because they can provide extra light and they can also help keep the basement warm in the winter. When putting LED strip lights in the basement, it is important to make sure that they are not too close to the floor. If they are too close, they may cause the floor to heat up and this could be dangerous.
How do you hardwire under cabinet LED strip lights?
There are a few ways that you can hardwire under cabinet LED strip lights. The first is to use a power supply that is specifically designed to power LED lights. The second is to use a transformer that is designed to run low voltage lights. The third is to use a connector that will allow you to plug the LED strip lights into an outlet.
If you are using a power supply, you will need to find the right one for the number of LED strip lights that you are using. You will also need to find an outlet that is close to the cabinet where you want to install the lights. The power supply should be plugged into the outlet and the LED strip lights should be plugged into the power supply.
If you are using a transformer, you will need to find one that is designed to run low voltage lights. The transformer should be plugged into an outlet and the LED strip lights should be plugged into the transformer.
If you are using a connector, you will need to find one that is designed to run low voltage lights. The connector should be plugged into an outlet and the LED strip lights should be plugged into the connector.
How do you power under cabinet lighting?
There are a few different ways you can power under cabinet lighting. One way is to use a power strip that is plugged into an outlet. The power strip can then be plugged into the light fixtures. Another way is to use a battery operated light. This is a good option if you do not have an outlet near your cabinets. You can also use a plug in light fixture that is powered by a light switch. This is a good option if you do not want the light to be on all the time.
How do I hide my LED strip power supply?
When it comes to LED strips, one of the main concerns people have is how to hide the power supply. This is especially important if you are using a strip with a built-in power supply, as it is not always the most attractive part of the strip. Luckily, there are a few ways to hide it.
One way to hide the power supply is to use a power supply extension cable. This is a cable that has a plug on one end and a socket on the other, and it can be used to extend the reach of the power supply. This is a good option if you are using a strip that is far from the power supply, as it will allow you to move the power supply closer to the strip.
Another way to hide the power supply is to use a power supply cover. This is a cover that goes over the power supply and helps to hide it from view. There are a few different types of power supply covers available, so you can find one that fits your needs.
Finally, if you are not using a strip with a built-in power supply, you can use a separate power supply. This is a small box that plugs into the wall and provides power to the LED strip. This is a good option if you want to be able to move the strip around, as it allows you to use a different power supply for each strip.
No matter which method you choose, it is important to make sure that the power supply is properly hidden so that it does not detract from the look of your LED strip.
How do you hide the power cord for LED strip lights?
LED strip lights are a popular choice for home and office lighting. They are affordable, energy-efficient, and available in a variety of colors and styles. One downside of LED strip lights, however, is that the power cord is often visible, which can detract from the overall aesthetic of the installation. In this article, we will show you a few ways to hide the power cord for LED strip lights.
The simplest way to hide the power cord for LED strip lights is to drape it along the edge of the installation. This can be done by folding the cord back and forth a few times and securing it with tape or a zip tie. If you are using a particularly long strip of LED lights, you may need to use a power extension cord to reach the outlet.
Another way to hide the power cord is to conceal it behind a trim or molding. This can be done by cutting a small hole in the trim or molding and feeding the cord through. You can then use adhesive tape or a hot glue gun to attach the trim or molding to the LED strip light installation.
Finally, you can also hide the power cord by running it behind the wall. This can be done by drilling a small hole in the wall and feeding the cord through. You can then use adhesive tape or a hot glue gun to attach the power cord to the wall.
Whichever method you choose, be sure to use caution when working with electrical cords. Always unplug the LED strip lights before working on the installation. And never attempt to work on an electrical installation if you are not familiar with the proper safety procedures.